3 Racing Sakura D3 RWD (current settings)

The 3 Racing Sakura D3 was my first purpose build drift chassis.  It started as a countersteer car that I eventually turned into RWD, and never looked back.  The chassis has a few purposeful mods and it is a solid performer.  It is pretty dialed in right now and runs smooth on our epoxy surface.  Below are my current settings.

Front:

Caster: 15deg
Camber: -7deg
Toe: 0deg
Ride Height: 7mm
Droop: 13mm
Spring: 3 Racing Blue
Shock Oil: 35wt
Piston: 3 Racing 3-Hole
Bladder Foam: None
Upper Shock Position: 5th from Outside
Lower Shock Position: 6th from Outside (Active Hobby Y Arm)
Tire: MST FR-F Gold (modified to 20mm)

Rear:

Camber: -2deg
Toe: -1deg
Ride Height: 6mm
Droop: 16mm
Spring: 3 Racing White
Shock Oil: 20wt
Piston: 3 Racing 3-Hole
Bladder Foam: None
Upper Shock Position: 10th from Outside
Lower Shock Position: Inside
Tire: Eagle Racing Hard

Weight Balance (with body):

Total Weight: 1594g
Distribution: 48.2(F) \ 51.8(R)

Power System:

Motor:  Turnigy Trackstar10.5
ESC:  Speed Passion Reventon R
Battery:  Turnigy Nano Tech 5300